MCE Remote with VLC

January 26th, 2010 by Arend Leave a reply »

(Updated September 22, 2010)




At home I use Windows Media Center available on Windows 7. It’s a great program but it doesn’t play all the video codecs and file types that I have in my library. Even advanced codec packs like sharks “Windows 7 codecs” do not always solve this problem. To the rescue comes VLC . A media player that can handle almost any media file you throw at it. When using VLC however, I’m no longer able to use my Media Center Remote Control.

Say hello to mceRemote2vlc:

I decided to try and build an application to handle this, without incorporating this functionality into VLC, but using VLC’s excellent RC interface. In short it allows you to control a running VLC instance by communicating with VLC’s built-in TCP-server.
If you want to give it a try be sure to:

  • Go to Tools-Preferences.
    Select Show All settings (bottom left corner)
    Click on Interface->Main interfaces
    Check “Remote control interface”
    Click on Interface->Main interfaces->RC
    Enter in the field “TCP command input”:
    Check “Do not open a DOS command box interface”

vlc configuration page 1

vlc configuration page 2

  • Install the .NET Framework 3.5 (if not already available)
  • Windows XP, Windows Vista, Windows 7
  • A Windows MCE Remote , the following eHome compatible remote devices should be supported:
    • Microsoft/Philips 2005
    • Microsoft/Philips 2004
    • HP
    • FIC Spectra/Mycom Mediacenter
    • Toshiba/Hauppauge SMK MCE remote
    • Hauppauge OEM MCE remote
    • Mitsumi MCE remote
    • Fujitsu Scaleo-E
    • Pinnacle PCTV Remote
    • Shuttle MCE Remote
    • Centarea Master Remote II

Supported buttons and default mappings:

button vlc_command Description
None none
Power1 none
Left menu left navigate menu
Right menu right navigate menu
Pause pause pause
Power2 quit exit vlc
PowerTV none
Stop stop stop playback
Record record ?
Rewind key key-jump-short go 10 seconds back
Play play play
Forward key key-jump+short skip 10 seconds
Replay previous previous playlist item
Skip next next playlist item
Back previous previous playlist item
Up menu up navigate menu
Info key key-intf-show toggle display interface in fullscreen mode
Ok menu select menu select
VolumeUp key key-vol-up volume up
VolumeDown key key-vol-down volume down
Start none
ChannelUp chapter_n next chapter
ChannelDown chapter_p previous chapter
Mute key key-vol-mute mute sound
RecordedTV f toggle fullscreen
Guide none
LiveTV none
DVDMenu key key-disc-menu show dvd disc menu
NumPad1 none
NumPad2 none
NumPad3 none
NumPad4 none
NumPad5 none
NumPad6 none
NumPad7 none
NumPad8 none
NumPad9 none
NumPad0 none
Oem8 none
OemGate none
Clear none
Enter none
Teletext key key-aspect-ratio toggle aspect ratio
Red key key-aspect-ratio toggle aspect ratio
Green key key-deinterlace deinterlace
Yellow key key-subtitle-track toggle through all subtitles
Blue key key-audio-track toggle through all audio tracks
AspectRatio key key-aspect-ratio toggle aspect ratio
Print none
Down menu down navigate menu


UPDATE: The latest version includes a setting to start minimized.

Please remove the previous version before updating. To keep your mappings:

Copy the file “mceRemote2VLC.s3db” located in the users profile dir (eg “C:\Users\arend\AppData\Roaming\mceRemote2VLC\mceRemote2VLC.s3db”) AppData is a hidden folder so you might have to make Explorer show hidden files. Backup this file before installing the new version. Uninstall  mceRemoteVLC , update to the latest version and copy this file back to its original location, overwriting the newly installed file.

A big “thank you” goes to the team of MediaPortal as most of the functionality is coming right out of this project

navigate menu


  1. yan says:

    You don’t seem to know EventGhost – give it a try, you will love it.

  2. admin says:

    I did however have a look at EventGhost. According the their website they don’t support Windows 7 x64, and judging related forum posts this seems to be true.
    Update: It does work on Win7 X64.

  3. cerebrolele says:

    Will try this evening, ty for sharing!

  4. cerebrolele says:

    I’ve a ACER mce integrated MCE receiver (CIR) in my laptop with ACER remote control.
    Do you think it will work?

    Also, it will work when right click on media file (*.avi) and use the “play with VLC” option?

  5. admin says:

    I’m afraid your remote might not be supported.
    The program only detects receivers in the list provided, it specifically checks for the deviceid located in the file C:\Program Files (x86)\mceRemote2vlc\eHome Infrared Transceiver List XP.xml.

    You can see this number with USBDview:
    A nice standalone exe to list all usb devices with lot’s of details.

    There is a small chance that adding your device is enough to get going. If so please provide me with this new line so I can add it to the list.

    For your other question, right clicking will work if you set this option in VLC’s configuration:
    Go to Tools-Preferences.
    Select Show All settings (bottom left corner)
    Click on Interface->Main interfaces
    Check “Remote control interface”
    Click on Interface->Main interfaces->RC
    Enter int the field “TCP command input”:
    Check “Do not open a DOS command box interface”
    Save and your good to go.

  6. cerebrolele says:

    also if my ir recever is built-in in the laptop? in my case it isn’t an usb device.

  7. admin says:

    Hmm, in that case it wont work.
    I will have a look into this, since I have an acer laptop myself with an IR receiver, but don’t hold your breath..

  8. cerebrolele says:

    ok, ty as well! at the moment i solved with 3rd party mentioned, i will follow your upgrade!

  9. dm says:

    I’m trying with Videomate k300.VLC running.
    When press any button on remote, button pressed screen is filling(mute, volumeup,volumedown…) but don’t control VLC.

    Device status=connected
    VLC connection status=offline on mceRemote2vlc.

    Any idea?

  10. kiwi skid kid says:

    thanks for putting in the effort to get this working, I have installed as per instructions and it is working but only for the first command, after that it sees the command in your app but does not make it to vlc? set up is windows 7 32bit. Appreciate any ideas.

  11. guest says:

    I own an ACER Laptop with build in IR receiver and the matching ACER Remote, but it is although supported. But the program just execute the 1st command (which works fine) and after that new commands weren’t send to vlc any more… (the program doesn’t even show them in “Commands to VLC:”

  12. Urmel says:

    Hi, i have a question about your programm.
    I get the Decive status to “connected” and the VLC connecting status to connected, too.

    All Pressed Buttons of My Haupauge MCE Remote are recognized but the only button which was send to VLC ist the play button. And it will only be sent once at the beginning.

    Do you have an idea whats wrong, or what i can do to get it to work properly.

    MFG Urmel

  13. Billkwando says:

    Alas, it doesn’t appear to work in XP. That is, assuming that the spaces are supposed to be there before the double hyphens. I entered it under Conrol Interfaces > Main Intyerfaces > RC, which is what I assume you intended for us to do. I also checked the box for it not to show the DOS box.

    If there’s anything I can do, testing-wise, please send me an email. 🙂

  14. admin says:

    Sorry for the late reply, I was not being notified about the new comments.

    In an effort to optimize the program, I made a rather stupid mistake where it would only connect once, and never send the new commands to the running VLC instance……
    I updated the installer, please uninstall the old version first.

  15. admin says:

    Billkwando: Did you enter in the configuration menu ?

    You also can check if VLC is running with the RC interface by using putty, enter IP= and port number 8765, select RAW as the connection type, then click Open. If a file is currently playing in VLC, typing “pause” without the quotes should pause the current track.


  16. Billkwando says:

    Here’s a short video I made showing the steps I’m doing in case I’m doing it wrong.

    Everything seems to be working fine but it’s not connecting to VLC.

  17. admin says:

    please first select/click the entry “Main interfaces” now select the checkbox “Remote control interface”
    Then expand the entry “Main interfaces” and click the RC entry. Then paste the following in the input field:
    You must restart VLC for this setting to take effect. Also, please install the latest and greatest version I uploaded today!

    I can’t see in the video if you selected the checkbox “Remote control interface”, but the “TCP command input” field should not state “vlc –rc-host= –rc-quiet” as this is used to start VLC from the command prompt, just use “” without the quotes.

  18. Billkwando says:

    in Putty I get “connection closed by remote host” then when I Ok out of it, I get an error:

    “Network Error: Connection Refused”

  19. admin says:

    Hmss, the VLC clearly is not activating the RC interface. Did you change the entry from “vlc –rc-host= –rc-quiet” to “″ ?
    Are you sure you checked the “Remote control interface” check box? For debug purposes, leave the “Do not open DOS command box interface” check box unchecked.
    If you don’t see this dos box, something is wrong.

  20. Billkwando says:

    Ignore the prev reply. I didn’t see your message cos I hadn’t refreshed the page. 🙂

    The big dos window popped up and I could play/pause/stop, but then I tried to check the box so the window wouldn’t pop up, and it stopped responding after that. I closed and reopened and rehecked the box, and closed and reopened again and still no dice.

    • admin says:

      What version of VLC are you running ? I’m using VLC 1.0.5. Don’t know if it has anything to do with it.

      • Billkwando says:

        1.0.5 “Goldeneye”, it says. The commands still pop up in your dos window, it just doesn’t do anything in teh VLC.

        Thanks for all the super-quick responses!

      • JRoh says:

        I followed your steps exactly, but still not registering.

        I am running an HP with Win7 32-bit and VLC ver. 1.0.1 Goldeneye

        All > Interface > Main Interfaces > (checked Remote control interface) > RC > (checked Do not open a DOS command box interface > (typed in TCP command input:
        Restarted VLC.

        Still nothing. I gather I need to get version 1.0.5 Goldeneye?

  21. Billkwando says:

    The newest version works great! Thanks!!!!

  22. Sir Shagsalot says:


    First the good news, all works as expected.

    Now the bad news. The buttons from the remote you have are nowhere near enough.

    As I play many real DVD’s I’d like the normal menu and Audio/Subtitle controls etc accessible.

    I think the best way would be a simple interface that has as dropdown list all VLC remote commands available and a simple “learn button” aehhhhm, button, so in your interface I could simply select (for arguments sake) “Cycle Subtitle Track” and then press the MCE Remote button I want this to map to (eg Blue in my case).

    I also don’t mind having drop down liasts for button and action, but rather than have you try to implement each whim of each user, just give them the tools? Possible?

    • admin says:

      Thank you, and I think you are right. It would make a lot more sense to create your own mapping. I hope to implement this in the next version.

  23. Sir Shagsalot says:


    I played a bit more with your program. It already recognises all MCE Buttons correctly (by name), so that side is already covered.

    Adding the complete MCE Mapping should be no big deal.

    If you provide a config file (.ini or .xml) to store the settings I’ll produce and then email you my complete mappings for using the MCE remote with VLC including subtitle/audiotrack switching and all DVD Menu functions etc.

    This stuff is especially of interest to all the Anime Fan faction, as many of the MKV files retain otriginal DVD navigation as well as mutiple sound/subtitle tracks.

    For me it’s important as our household is multilingual, so we different subtitles etc on different DVD’s…

    Greez SSAL

  24. Leon says:

    Hi there. The program works great except for one thing. When I press the Fwd (Fast Forward) button, instead of jumping forward, it just reduces the play speed by half. Am I doing something wrong or is it just a bug? Just letting you know that’s the only issue I’m having. Other than that, great work on the program!

  25. admin says:

    I have included a learn option, using a sqlite backend. I know this is less accessible but it will suffice for now. I will post this update somewhere during the day.
    I must first walk my dog 😉

  26. admin says:

    Update deployed, please use the following remote commands as a guide for your mapping:

    +—-[ Remote control commands ]
    | add XYZ . . . . . . . . . . . . add XYZ to playlist
    | enqueue XYZ . . . . . . . . . queue XYZ to playlist
    | playlist . . . . . show items currently in playlist
    | play . . . . . . . . . . . . . . . . . . play stream
    | stop . . . . . . . . . . . . . . . . . . stop stream
    | next . . . . . . . . . . . . . . next playlist item
    | prev . . . . . . . . . . . . previous playlist item
    | goto . . . . . . . . . . . . . . goto item at index
    | repeat [on|off] . . . . toggle playlist item repeat
    | loop [on|off] . . . . . . . . . toggle playlist loop
    | random [on|off] . . . . . . . toggle random jumping
    | clear . . . . . . . . . . . . . . clear the playlist
    | status . . . . . . . . . . . current playlist status
    | title [X] . . . . . . set/get title in current item
    | title_n . . . . . . . . next title in current item
    | title_p . . . . . . previous title in current item
    | chapter [X] . . . . set/get chapter in current item
    | chapter_n . . . . . . next chapter in current item
    | chapter_p . . . . previous chapter in current item
    | seek X . . . seek in seconds, for instance `seek 12′
    | pause . . . . . . . . . . . . . . . . toggle pause
    | fastforward . . . . . . . . . set to maximum rate
    | rewind . . . . . . . . . . . . set to minimum rate
    | faster . . . . . . . . . . faster playing of stream
    | slower . . . . . . . . . . slower playing of stream
    | normal . . . . . . . . . . normal playing of stream
    | f [on|off] . . . . . . . . . . . . toggle fullscreen
    | info . . . . . information about the current stream
    | stats . . . . . . . . show statistical information
    | get_time . . seconds elapsed since stream’s beginning
    | is_playing . . . . 1 if a stream plays, 0 otherwise
    | get_title . . . . . the title of the current stream
    | get_length . . . . the length of the current stream
    | volume [X] . . . . . . . . . . set/get audio volume
    | volup [X] . . . . . . . raise audio volume X steps
    | voldown [X] . . . . . . lower audio volume X steps
    | adev [X] . . . . . . . . . . . set/get audio device
    | achan [X]. . . . . . . . . . set/get audio channels
    | atrack [X] . . . . . . . . . . . set/get audio track
    | vtrack [X] . . . . . . . . . . . set/get video track
    | vratio [X] . . . . . . . set/get video aspect ratio
    | vcrop [X] . . . . . . . . . . . set/get video crop
    | vzoom [X] . . . . . . . . . . . set/get video zoom
    | snapshot . . . . . . . . . . . . take video snapshot
    | strack [X] . . . . . . . . . set/get subtitles track
    | key [hotkey name] . . . . . . simulate hotkey press
    | menu . . [on|off|up|down|left|right|select] use menu
    | help . . . . . . . . . . . . . . . this help message
    | longhelp . . . . . . . . . . . a longer help message
    | logout . . . . . . . exit (if in socket connection)
    | quit . . . . . . . . . . . . . . . . . . . quit vlc

  27. Sir Shagsalot says:


    Just trying download, I’m getting “not found” (404) on the new file.

    Greez SSAL

  28. Sir Shagsalot says:


    Somehow I am still getting 404.

    Could you possibly e-mail the file to me?

    Greez SSAL

  29. Sir Shagsalot says:


    ThatX for the file, and yes, I did refresh the page, but perhaps there is a cache at the ISP or within the great firewall of china that did not update.

    Anyway, I installed it and set it up to a basic level.

    I still have work to do with some mappings, but I have now got aspect ratio and subtitle as well as audio track switching done. Works splendidly.

    For those use:

    key [command] syntax

    The Key Commands can be found here:

    So, the syntax for changing the aspect ratio (for example) would be:

    key key-aspect-ratio

    Once I am finished (probably past the WE) I’ll send you the file with my mappings to include in the setup (I assume it is mceRemote2VLC.s3db), the aim is to sensibly map any MCE Remote key that could be of use in a “DVD-Player”. Then Users can change the default mappings to their hearts content.

    Greez SSAL

  30. Billkwando says:

    I tried the new version with the Settings tab this morning before work. I didn’t try any mappings yet, but it seemed to be working great with the default. 🙂

  31. Arend says:

    The “Down” button is missing in the sqlite database. I will update this in the installer when Sir Shagsalot has completed the DVD-style mappings. For now please use the link next to the installer download.
    Just replace mceRemote2VLC.s3db with the currently installed version in c:\Program Files\mceRemote2VLC\

  32. Billkwando says:

    Leave it to me to get it wrong. I don’t fully understand the list of commands. I (of course) tried to program the subtitle button first. I tried just “strack” (I don’t understand what the [X] means) and I tried “strack English” assuming the [X] was a variable. Both resulted in the VLC preferences box opening and covering the screen. If it was in fullscreen, nothing happened.

    Yer instruckshuns need moar werdz. :p

  33. Arend says:

    Use “key key-subtitle-track” as the command for your subtitle button.
    This will toggle the available subtitle tracks.

    Sir Shagsalot posted a link to all the available hotkey options.
    Using putty, as I mentioned somewhere in the comments might ease your testing as it will show the reply from VLC. For example your strack command results in:

    +—-[ Subtitles Track ]
    | -1 – Disable *
    | 3 РTrack 1 Р[Fran̤ais]
    | 4 – Track 2 – [Nederlands]
    | 5 – Track 3 – [English]
    +—-[ end of Subtitles Track ]
    strack: returned 0 (no error)

    Of course this means we have to issue something like “strack 5”, this tells us “key-subtitle-track” is an easier solution.

  34. Billkwando says:

    So I’d have to have a command for each potential subtitle track, rather than being able to just toggle throiugh them like on a DVD player? Like, 4 or 5 buttons set up for subs (assuming that my videos don’t all have the same number of sub tracks, the english track might not always be 5, for example).

  35. Arend says:

    no no, just enter “key key-subtitle-track” as the subtitle toggle command, that’s all.

  36. Sir Shagsalot says:


    To keep it simple.

    For the hackers in the crowd, I am sure you are having fun, let me in on any neat stuff you discover.

    For the rest, who, just want to download a package, install it and be set and good to go. Hold your pretty horses a day or two, between arend and me we will see you right in a week or so. I’m just really busy till the weekend, so I cannot finish the job as well as I wish.

    for super eager beavers I’m posting my “as is” mapping file to Arend.

    Greez SSAL

  37. Arend says:

    Post updated, thanks to Sir S.
    The main app now scrolls the “button pressed” and “commands to VLC” fields to the last item.

  38. Billkwando says:

    Hey thanks for the help with “key key-subtitle-track”. You might wanna add the “ck” to your table. Being an idiot in training, I actually tried “key key-subtitle-tra” to see if it would work. Of course it didn’t! :p

    I have subs working fine now, but it still pops up the VLC pref box whenever I hit the button……but not when it’s in fullscreen, so I guess that’s all that matters.

    I wanted to point out that my main remote, an HP, doesn’t have the yellow, blue, green, & red buttons, just FYI. I have the HP remote, 2 regular Xbox 360 remotes, and 2 Logitech Harmony remotes (one XBox 360 and one regular), so I guess 4 out of 5 with the colored buttons aint bad. Do all MCE remotes come with those now?

    • Arend says:

      Thanks, post updated.

      Not sure about other remotes, I have the one in the picture.

      BTW, I don’t get any pref box on the “key key-subtitle-track” command. Maybe this is a preference setting somewhere in VLC.

  39. Billkwando says:

    Oh yeah, and I used the “Print” button for subtitles. It seemed fitting. 😛

    Just thought you might find that amusing.

  40. Arend says:

    hehe, only in HP though, I don’t have that button.

  41. Billkwando says:

    Your download link doesn’t appear to be working. I had to download from the directory.

  42. Sir Shagsalot says:

    Okay Folks,

    Just to let you know my setup.

    First, we use Media Portal, but I need DXVA (Video Acceleration) and Subtitles and this does not work well, regardless which Codec Pack I try.

    Either VLC or MPC-HC do play with Subtitles and DXVA. I always felt VLC had the edgo on picture quality (especially on my 80″ Projector), but remote control was much harder than MPC-HC for which Intelliremote had a usable profile and Eventghost was too hard work… ;-).

    So Arend’s initiative came just right.

    My setup now uses VLC as external Player in MediaPortal. I have set VLC’s main interface (use settings – all – interface – main interface) set to “remote control interface”. I also set in Playlist the “Play & Exit” parameter, so VLC plays the file and then returns to Media Portal.

    In the Video Section it is worth disabling “Show Media Title on Video”, which omits the display of the file-name.

    All this means there are in normal operation never any VLC Windows or Menus, the integration with Media Portal is practically seamless.

    I have some mappings that differ slightly from the above posted. The main one is that stop and back are mapped as “quit”. This way I get straight back to Media Portal.

    As Media Portal has issues with playing DVD’s via external players I have also mapped an unused button (TV Guide in my case) as “load DVD” using the following command:

    add dvd://D:\

    Anyway, I just thought someone might be interrested.

    Greez SSAL

  43. Sir Shagsalot says:


    My Remote is the quite snazzy one that ships with the OrigenAE Cases (OEM by Philips I believe) and the Media PC is in an OrigenAE S16T case, with a fanless Via motherboard and Pico PSU (so completely fanless), hence the need for DXVA (the CPU is too weedy to decode video streams without hardware help).

    Greez SSAL

    • Arend says:

      Nice htpc you have there.
      I might wrap this post up, clean it a bit and post your specific MediaPortal mappings for anyone interested. It would be nice to receive your file once the dust settles.

  44. Billkwando says:

    Is there a way to get the time elapsed/time remaining to show on screen with a button push, the same way it does when you rewind (but without rewinding)?

    On my TV, the real VLC box you get when you hit “info” with the current mapping is too small to really read.

  45. Arend says:

    Sure, use: “key key-position” as the command.

  46. nir says:

    just add this to the vlc shortcut –extraintf rc –rc-host localhost:8765 –rc-quiet

  47. mandiom says:

    Amazing! It works out of the box with an Acer MCE Remote! Great work!!

    Only prob: Rec TV for full screen also brings up Media Center Rec TV :S

  48. Cerebrolele says:

    download link doesn’t work.

  49. Cerebrolele says:

    I’ve tried with my Acer MCE Remote built in, but unfortunely it didn’t work.
    I follow all the steps configuring vlc and installed the .msi
    anything missed?

    • Arend says:

      This application queries all USB devices to find an IR receiver. Your built-in IR receiver probably does not connect to an internal USB port.

  50. Cerebrolele says:

    sorry again! it’s not my lucky day! now I’ve tried again and it works perfectly!

    the CIR devise builtin and my acer MCE remote, could be added to the compatibily list!

    in next days I will try to map some commands to better improve the experience!
    Thank you all!

    • Arend says:

      Wonderful! It would be great if you could share your device id. That way I can update the list of compatible devices.

      • Cerebrolele says:

        tell me how to do, I will be glad to give all the information you may need!

      • Arend says:

        You mentioned “the CIR devise builtin and my acer MCE remote, could be added to the compatibily list!” I assumed you added your device to the file “eHome Infrared Transceiver List XP.xml” if this is the case, could you send me your modified “eHome Infrared Transceiver List XP.xml” ?
        My email is arenddeboer at

  51. Billkwando says:

    I just wanted to report that it still works. :p

  52. Carter says:

    What does the MSI installer actually install? What I’m wanting to do is to be able to map the keys to my URC MX-980. Do you have the hex equivalents for the keys?

  53. Rob says:

    Hi, i have the Microsoft Media Centre Remote (model: 1039) RC6 ir and followed your VLC Player preference settings guide and installed the the Set-Up files. I use XP Home Edition not Media Centre. I can only get the Arrow Keys and the OK button to function however can’t get any other buttons to work so no transport buttons working. Your help would be appreciated, thanks : )

  54. Rob says:

    Hi Billwando, i got the remote working the following day. Did not realise the set-up files was an actual app. I used the app and it was a success. Worked great an ISO file DVD rip. On an AVI files some of the functions were not useable but on the whole i am very pleased with it. If the app could be used on BBC iPlayer and iTunes that would be great but i don’t think that it would be possible. Thanks for this : )

    • Billkwando says:

      Glad you got it up & running! It does everything I’ve tried to do with it, besides fast forwarding & rewinding correctly. What issues were you having with AVIs?

      As for the web player issues, I wonder if they have keyboard shortcuts? I’m sure somebody could program a remote app that at least does that.

  55. martV says:

    Bit of a problem getting it all to work:
    mceRemote2VLC show all the commands I’m sending from the remote, but it says also:
    Device status: connected
    VLC connection status: Unable to connect

    (ofcourse I have set the right preferences)

    Would appreciate a hint (or solution 🙂

    • Arend says:

      I would advice to use putty to check if VLC is listening on port 8765 and listening to commands. It’s a standalone application, no need to install. In putty, set the connection to raw, host to and port of course to 8765. Play a file and then type for example pause, or info in putty’s connection window.

  56. Rholaenos says:

    I’m having exact same problem noted by martV on 04-8-10
    I’ve never used Putty before, so maybe I’m missing a setting for the test to work.

    I play a file in VLC Player then
    In Putty Session menu:
    IP Address Port 8765
    Connection type:

    the window kept closing so I put (*) Never for close window on exit.

    The following error windows pop up before I have a chance to type anything:

    connection closed by remote host [OK]

    PuTTY Fatal Error
    Network error: Connection refused

  57. Billkwando says:

    Yeah, that same thing got me for about 5 minutes when I recently reinstalled.

  58. Arend says:

    Looks like there is room for improvement in the documentation section.
    I will update the post with the screen shots.


  59. Slim says:

    All working win 7
    Thank you Just what i was looking for

  60. Tomas says:

    All Working Windows 7 x64
    nicee job =D

    can you show the source code?

  61. dremavec says:

    Will it work with this remote? Sory for a n00b question but I am buying a remote only for VLC and am afraid to pick the wrong one 🙂

    Tnx in advance

  62. Arend says:

    Np, let me know how it works out.

  63. Tim says:

    Would be able to mod your app to accept a user defined rc port number instead of 8765?

  64. Arend says:

    New version:
    – Users can change the ip and port number
    – More accurate device (ir remote) status
    – SQLite db is stored in “users\AppData\mceRemote2VLC\” instead of the “Program Files\mceRemote2VLC”

    This new version will not import your old custom mappings.

    If you don’t need user defined ip/port settings, you probably don’t need to update.

  65. Tim says:

    Tried installing BETA and got error:

    The following properties have been set:
    Property: [AdminUser] = true {boolean}
    Property: [ProcessorArchitecture] = Intel {string}
    Property: [VersionNT] = 6.1.0 {version}
    Running checks for package ‘Windows Installer 3.1’, phase BuildList
    The following properties have been set for package ‘Windows Installer 3.1’:
    Running checks for command ‘WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe’
    Result of running operator ‘VersionGreaterThanOrEqualTo’ on property ‘VersionMsi’ and value ‘3.1’: true
    Result of checks for command ‘WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe’ is ‘Bypass’
    ‘Windows Installer 3.1’ RunCheck result: No Install Needed
    Running checks for package ‘.NET Framework 3.5’, phase BuildList
    Reading value ‘Install’ of registry key ‘HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5\1033’
    Read integer value 1
    Setting value ‘1 {int}’ for property ‘DotNet35InstallSuccess’
    The following properties have been set for package ‘.NET Framework 3.5’:
    Property: [DotNet35InstallSuccess] = 1 {int}
    Running checks for command ‘DotNetFX35\dotNetFx35setup.exe’
    Result of running operator ‘ValueEqualTo’ on property ‘DotNet35InstallSuccess’ and value ‘1’: true
    Result of checks for command ‘DotNetFX35\dotNetFx35setup.exe’ is ‘Bypass’
    ‘.NET Framework 3.5’ RunCheck result: No Install Needed
    Launching Application.
    Error: Unable to locate application file ‘Setup.msi’.


  66. Arend says:

    Thanks for testing, please try this one:

    • Tim says:

      Yes, the msi works fine. I tested the user-defined IP address and port number, and they both work great. Nice!

      If you would like, I may be able to send you some code that would allow hostname to be used as substitute for IP address.

      • Arend says:

        I was thinking this feature is going to be used mostly in a home network without DNS configured. Wouldn’t an IP address be better for this use case? Maybe both IP and hostname should be possible.

        • Tim says:

          True most home LAN’s dont run a DNS, but I believe the .Net code that resolves IP from name will use NetBIOS over TCP/IP (NBT) as an alternate if DNS resolve is not possible, I think all Windows machines maintain a legacy NetBIOS namespace. I’ve used this snippet of c# code 🙂

          // Get IPV4 address from host name

          private IPAddress Get_IPV4Address_From_Host(string hostName)
          IPAddress[] ipAddrList;
          IPAddress ipv4Address = null;

          ipAddrList = Dns.GetHostEntry(hostName).AddressList;
          catch (SocketException e)
          ipAddrList = null;
          Write_ToLog(LOG_MSGTYPE_ERROR, “Host: ” + hostName + ” DNS resolve error: ” + e.ErrorCode.ToString() + “. ” + e.Message);

          if (ipAddrList != null)
          for (int i = 0; i < ipAddrList.Length; i++)
          if (ipAddrList[i].AddressFamily == System.Net.Sockets.AddressFamily.InterNetwork)
          ipv4Address = ipAddrList[i];
          ipv4Address = IPAddress.Parse(""); // Set to to indicate error to calling routine

          return ipv4Address;

  67. jamesmadrid says:

    I am excited to try this, so I can use an MCE remote with VLC. After installation and running ‘mlcRemote2vlc’, it doesn’t seem to work for me. ‘Device status’ shows ‘disconnected’ . Yet, my remote seems to be ok and I can select different icons on my Desktop ok by pressing the arrow keys on the remote. Furthermore, XP device manager shows HID device, etc. I also installed latest updates for .NET 3.5, etc. Any suggestions? Did I do something incorrectly? What can I do to debug this? Rgds — JM

  68. Miguel says:

    Hello, would you publish the source? 🙂


    • Arend says:

      The latest beta source :
      Its quite poorly written. Started as a hack to see if I could control vlc with the media portal libs. Then added some buttons here and there, removed something here, added something there. In short no overall design and a lack of a coding convention. I hope to update this program one day so I don’t have to be ashamed while sharing the source 😛

  69. David says:

    Hey Arend,
    cery well done! I love your little tool and use it very often.

    But unfortunately it seems to be a little buggy (or it´s me for not getting it to work properly).

    When your program is running and I go to the Media Centers music library, the Center missunderstands some commands. Pressing the skip-button, doesn´t work in the first place and then finally is interpreted as a “Stop”-command. After having quit your program everything works fine again.

    The second thing is, that I´m not able to fast forward the movies in VLC, when having started it out of Media Browser. When I start VLC from the explorer or the desktop, it seems to work fine (10 second jumps).

    Do you have any suggestions, to solve this problems?

    But apart from that, it´s a fantastic small piece of software. Thank you very much!

  70. Arend says:

    Thanks. I just tested your first problem and MCE does indeed act strange when mceRemote2VLC is running. I do not fully understand why this happens since the remote buttons are not trapped or altered in any way. I might be able to prevent this from happening by temporary disabling mceRemote2VLC when it detects MCE running as the foreground application. I am not sure how this will affect other users as they may rely on the current behavior. (not sure about the use case though) Maybe this should be an option in the settings panel.
    I suppose it requires a continues polling of the foreground window.

    I installed the Media Browser plugin, but I cannot reproduce your second problem. Some questions:
    – Did you set VLC to to listen for rc commands using VLC’s settings page ?
    – Or perhaps by adding the –rc-host your_host:port flags ?
    – Windows 7 / Vista / XP?
    – mceRemote2VLC beta, or 1.0?

  71. David says:

    Thank you very much for your fast answer and testings.

    If I understand you in the right way, you wanna know, if VLC does react at all. If you mean that, I can say: yes it does it very well.

    Even when I start it out of Media Browser, I can switch between subtitles and languages (I reconfigured the buttons for this commands, because, the defaults were making trouble with Media Control). The only thing, that doesn´t work (out of Media Browser), is the fast forward (rewind). Sometimes (in very rare cases) it makes the 10 seconds jump, but mostly it makes the VLC to drop to the frame, where it was right in the moment, I pushed the fast forward.

    VLC doesn´t have this behaviour, when beeing launched without Media Browser.

    I deinstalled Media Controll, cause after having your fine tool, I don´t need it anymore, but it had no effect.

    I´m running Windows 7 64bit and the latest version, you posted in the comments.

    But if you could fix the MCE Problems (perhaps as an option in the settings), it would be great.

  72. Arend says:

    I think your second problem is going to be the hard one as I do not know what is causing VLC to miss the request. Do all the forward button presses show up in the “Commands to VLC” box?

  73. David says:

    It seems to be a problem of VLC itself. So don´t worry. Even when i just use the hotkeys on my keyboard, VLC reacts in an inkonsistent way. Pressing the button for a 10 sec skip (shift right) it jumps 10 secs for the first time. If I repeat this too fast, it jumps sometimes 7 secs, sometimes not at all.

    So this is fine.

    To avoid this behaviour, I redifined my skip and replay buttons on the remote, to make longer jumps, cause I don´t use the playlist and have therefore the skip button unused.

    But if it would be possible to solve my first problem, I would be really glad.

  74. skdubg says:


    nice tool. it works perfectly.

    but can you please add an option, to start this tool minimized at windows startup?

    thanks in advance

    • Arend says:

      No problem, but it will be placed on the todo-list.
      Currently containing:
      – handle IP as well as hostname in settings dialog
      – fix remote issue’s when MCE has focus.
      – Add option to start minimized
      – Disable “button pressed” dropdown from changing on selecting a “Map to VLC command” entry in “Settings->create mapping”

      • Sir Shagsalot says:


        Some notes.

        First of all, I just upograded VLC to V1.1.2.

        In this (and I suppose future) Version the RC interface has been depreciated. For the time being it remains available as “oldrc”.

        It may be due to the replacement of “RC” with “OLDRC” that VLC connection status is now always “offline” even though VLC received remote commands correctly.

        Also, when installing this version of VLC you must uninstall the previous version AND use “clear cache and settings” and manually re-set everything. If you keep the old settings with the interface setting for RC VLC will more or less lock up.

        I would actually suggest that Arend submits the work here to the VLC team for inclusion with VLC as build in interface. Pending that I can think of a few more things.

        I do not use VLC with MCE/MyMovies, but Media Portal, so I do not have the related issues.

        However, it may be desirable that MCERemote2VLC does trap the MCE Remote commands when VLC is playing media in the foreground.

        As it stands some buttons cause misbehaviour in MP in the background.

        For starting minimised, simply create the icon for starting MCERemote2VLC with the window set to minimised. Adding a setting item “start with windows” that creates an icon-copy in startup would help some users.

        For MCE/MyMovies I think the MCE Remote’s “Green Button” shold bring MCE back.

        Is so, maybe a setting “send green button” on Stop/Quit option could fix the current irritation easily.

        Finally, I would suggest including a checkbox that allows forced setting of VLC for Interface etc., as I can see this an issue for many people.

        Perhaps even a second checkbox to set the settings for MyMovies to use VLC.

        BTW, my own settings for starting VLC 1.1.2 as external Player in MP are as follows:

        %filename% -I extraintf oldrc rc-host localhost:8765 rc-quiet

        The “%filename%” part brings in the file being played, the rest forces VLC to the correct interface settings all the time.

        My main VLC Icon has extra arguments of -I qt appended, so I always get a normal copy of VLC started if I explicitly invoke it (to tweak some settings or such).

        Greez SSAL

  75. jinjin says:

    Back and Replay should be remapped from previous to prev for VLC 1.0.5

    • Arend says:

      Thanks. The entire RC interface of VLC seems to be deprecated in VLC 1.1. I think in favor of the HTTP interface. I will have to look into that too.

  76. deeps says:

    Great utility, I am unable to see that it is connecting to the VLC player but not the remote device. I have a nero liquid tv remote. In the VLC key settings, some keys are recoginized by the application but not ff/rew.

    Is there a way you can add the hardware support for this ir usb dongle?

    • Arend says:

      Hi Deeps,

      I would love to help you but I would probably need access to that specific remote. I’m also busy with a few commercial projects, you will understand that is my first priority.

      – If the remote works in MediaPortal I might be able to make it work in mceRemote2VLC. But a quick check suggest this is not the case.
      – You might want to try EventGhost It has support for VLC and supports a wide range of remotes. It’s just a bit harder to configure.

  77. zac says:

    Hi there.
    First of all thanks for the great work.
    I have an issue though. I’m using a HP dv5 with vista and I have an HP IR remote.
    All the buttons work fine except for the play button. The button is recognized as “button 110” by the soft, I tried mapping it following the instructions but it won’t work.
    I looked up on some forums and other people have the same kind of issue with the HP remote and the play button.
    I’m trying my luck here to see if anyone has any ideas.
    Thanks in advance.

  78. Arend says:

    hi Zac,

    Sorry to hear your remote doesn’t work properly.
    Are you saying pressing the button gives you a “button 101” message in the “button pressed” log box inside mceRemote2VLC?
    If this is the case, I think a small update can make it work.

  79. amigasger says:

    Why does this interface still have to look that ugly ? We are living in 2010 – and the white web-gui is worse than the old curses-dos-interfaces…

  80. roman says:

    can you make your app integrated with VLC

  81. roman says:

    and you can use a multimedia keyboard with iTunes

    • Arend says:

      I don’t think VLC has such a plugin folder like iTunes where you can drop a dll and it’s pickud up. VLC 1.1. however introduced new add-ons and script framework options. So it integration might be possible now.

      I however lack the time to implement this, at least for the coming months.

    • Arend says:

      I am aware of intelliremote. Sounds like a great app, but I don’t have a need for it. My app does everything I need. And besides, it’s not free.

    • Sir Shagsalot says:


      I tried to use Intelliremote for a while (with MPC-HC). I gave up. It takes way too much to set up to work correctly to the kind of level I get easily with MCERemote2VLC and it is expensive for a simple remote control helper app with so little real support for applications.

      In fact, some of my earlier suggestions to Arend directly derived from my frustration with Intelliremote.

      Greez SSAL

  82. TAG says:

    Thank you for the work – much appreciated…!

  83. Ralf says:

    First thanks for your great work. I use VLC player 1.1.0 and Win7x64 . I download the setup.msi and install it. Then I made your recommended settings in VLC. Then I started manually mceRemote2vlc.exe and VLC player. My Remote Harmony One with “MCE” profile works well in VLC player, great job, great thanks.
    But mceRemote2vlc.exe start every time manually is not for lazy people like me. So I created shortcut and copied to Windows startup. When the PC restarts mceRemote2vlc starts now, but first small problem: It starts in the “window mode” not as a tray, i have to resize it manually. there is a solution?

    But now the big problem: I use Win7 MCE. To play my movie collection, I use the plugin “MyMovies”. In the MyMovies configuration I choose VLC player as the “external players” because he plays well MKV etc.. WMP12/7MC as “Windows Media standard” can not do that.
    When I use the MCE plugin “MyMovies” select a movie and start to, MCE minimized in the taskbar, start Vlc player and go into full screen mode, the movie is beautiful and everything can be used with MCE remote. If the movie is over or I press “Quitt” on the remote, exits and closes VLC player and MCE would have to back to “full screen mode”. Sorry, but MCE is minimized.
    I found out that it creates the current mceRemote2vlc.exe. Whether it is running in windowed mode or as a tray icon, MCE not maximized. Only when I manually mceRemote2vlc finish to maximize MCE again automatically. This is not very comfortable.

    Is there a way mceRemote2vlc.exe only at the start of vlc.exe start automatically and at the end of vlc.exe terminate automatically again? Or a different solution to my problem?

    Sorry for my bad english, I’m German. Thank you. Greetings Ralf

  84. Arend says:

    Hi Ralf,

    Thank you.
    You have a good point here and as I think about it, your suggestion might even solve other problems people are experiencing while running mceRemote2VLC in tandem with MCE. I’m currently working on a project that requires my undivided attention. But I will definitely look into this in the coming weeks. Together with the option to start minimized as this has been requested before.



  85. Ralf says:

    Hi Arend
    Nice to hear this, I am a patient person. I look forward and hope you will find a solution for the future. Thanks again. Greetings Ralf

  86. Nick says:

    Thanks for this great tool, but im having a bit of trouble in mce itself with the remote commands.

    In VLC everything works fine but when im in live tv in win7mc while watching live tv the left righ up down and fast forward rewind info buttons dont work they all just act as a stop button in all kinds of media also not just live tv…


    • Arend says:

      There is a known incompatibility while running MCE and mceRemote2VLC simultaneously. I will try to fix this by only starting mceRemote2VLC when VLC is started as an external player. It will probably take about a month before a fix is released.

  87. GF says:

    This works wonderfully but is there any way to give priority to vlc when using media center? Right now i have vlc working as an external player so when i play .mkv’s the media browser plugin minimizes media center and opens vlc but my remote is still controlling media center. Any help would be great. I’m using windows 7.

  88. Arend says:

    Some remote buttons are hard wired and will always reach media center whether it has focus or not. These buttons should not be used to control vlc when they have to run at the same time. The play buttons for instance will start a recording even if mce does not have have focus if media center is in “Recorded TV” Nothing happens when it is on it’s main screen. This might be trial and error before you have a working set (I don’t use vlc and mce at the same time).

    On a related note, I hope to start working on this project again in September/Oktober. I just don’t have the time right now.

  89. Ralf says:

    I work with MyMovies and VLC (external Player) in MCE (Win7x64). I us a Logitech “Harmony One” Remote with MCE-Profil and a USB-RC6-IR-Controller. All Buttons works fine with VLC for me, but one Problem, read my post from 13/07/2010:

    “When I use the MCE plugin “MyMovies” select a movie and start to, MCE minimized in the taskbar, start Vlc player and go into full screen mode, the movie is beautiful and everything can be used with MCE remote. If the movie is over or I press “Quitt” on the remote, exits and closes VLC player and MCE would have to back to “full screen mode”. Sorry, but MCE is minimized.
    I found out that it creates the current mceRemote2vlc.exe. Whether it is running in windowed mode or as a tray icon, MCE not maximized. Only when I manually mceRemote2vlc finish to maximize MCE again automatically. This is not very comfortable. ”

    I hope Arend make a solution for this, but we must give him time….

    PS: I us MCE in Full-Screen-Modus, not Window-Modus. Hope its help you.

  90. jMann says:

    Hello, my first time trying the software, as it looks like it has promise. I tried the s/w upon a few trials and errors, and it managed to rewind, fast forward and the like; so, I will be checking back for updates. I have a multitude of players, GOM which I use constantly, Windows Media Center, which I never use at all, VLC which I use to an extent, and WinAmp I never use at all. I just like to use remote to rewind and fast/forward without having to use keyboard/mouse to navigate. Thank you so much for this, and will check back for more info or updates.

  91. Arend says:

    Okay folks I know it has been quiet lately, a big project is reaching it’s deadline, still much to do but there is light at the end of the tunnel 🙂 I will review all comments and decide the best course of action somewhere mid September.

  92. Ralf says:

    Good sound arend 😉 Thank you very match

  93. eistmxcxc says:

    Works fine, thank you very much!

  94. E:V:A says:

    @Arend: What an excellent piece of software!! Thank you so much. Just what we all needed. Worked out of the “box”.

    I cleaned off WMC (MCE) from my HP laptop only a few months after I got it. It was interfering with almost everything, including making my laptop excruciatingly slow. While the MCE TV database was conflicting with a variety of normal Win updates. In addition the TV card that came with it, never worked and never will, as HP is pretending it doesn’t exist. However, it came with 2 remote controls! Both which I can now use for controlling my PC and now also VLC!

    Looking forward to starting up VLC with mceRemote2VLC automatically and minimized. Finally, it would be a great idea (as Sir Shagsalot mentioned) to have your app included with VLC.

    Thanks again. 🙂

    • Arend says:

      Thank you.
      I might ditch WMC/MCE too for it is getting more and more unstable here. Doesn’t work nice in multi-task/monitor environments and the list goes on. The only thing left is ease of installation/setup and eye candy.

      Anyway, I expect to implement minimized startup this week.

  95. Arend says:

    Just in time! I uploaded a new version with a start minimized option in the settings dialog.



  96. JA says:

    Just installed the latest version, but when I tried to open it, it crashed immediately.

    I’m running Windows 7 (64-bit).

  97. Ralf says:

    Hi Arend, thanks for your upgrade. Version 2 works. But I can not find difference with preceding version, except that now mceremote2vlc.exe minimized automatically on request.

    The problem is that MCE is minimized by end of VLC always exists. yet. Maybe you can help in solving this:

    “…….the media file to play and goes full screen with vlc. When the media is done playing it closes vlc out and returns you back to media center……”


    Best Regards Ralf

    • Arend says:

      Thats right, I only added the minimized functionality for now.

      Concerning your other issue, your problem is that MCE stays minimized even after VLC exits ?

  98. Ralf says:

    “Concerning your other issue, your problem is that MCE stays minimized even after VLC exits ?”

    Yes, must maximize manually.

  99. Arend says:

    I’m not sure if I can help. I don’t see any reason for an MCE-plugin to minimize MCE while an external player is launched. Depending on the plugin used there might be an option to disable this behavior?

  100. Ralf says:

    Arend, MCE not maximized because mceremote2vlc.exe is active. If not mceremote2vlc.exe works, everything works perfectly.
    The reason is sure that the “focus” on the remote control mceremote2vlc.exe, rather than on MCE.
    If I manually maximize MCE, the “focus” of the remote control is back to MCE.
    One solution would be mceremote2vlc.exe automatically start and stop with vlc.exe.
    Can you build it? Please.

    • Arend says:

      Ralf: Do you start mceRemote2VLC from the MCE plugin ?
      I tried with the Media Browser plugin and as long as VLC closes after playing, MCE is maximized again, this is a configuration option, or parameter to VLC (–play-and-exit) or use the Power2 button on the remote to send the quit command to VLC.

    • Drew says:

      I’m also wondering if there is a way to automatically run/stop mceremote along with VLC.

      • Arend says:

        Not implemented. It could be done with a script that starts mceremote, then vlc, waits until you exit vlc and then kills mceremote.

  101. Arend says:

    Guys I finally managed to fix the problem where mceRemote2VLC interferes with the remote control of MCE. It should be fixed now, but UNINSTALL the previous version before you update, alongside the download link is an explanation on how to keep your mappings. (if you made customizations) Please give it a try and let me know how it works out.

  102. Ralf says:

    Hi Arend, I use MyMovies plugin, not media browser. This is the original configuration of the “ExternalPlayers.xml” from MyMovies to start VLC.:



    “[PATH]” –fullscreen


    How should I modify this so mceRemote2vlc.exe with start / end will be?

    • Ralf says:



      “[PATH]” –fullscreen


      • Arend says:

        mceRemote2VLC should just run in the background. Do not start it as part of an external player configuration. I will install MyMovies and see what’s going on.

    • Arend says:

      I installed MyMovies, but using an external player requires a paid subscription so I removed it.
      All I can say is that it works in Media Browser. And I believe this has more to do with MyMovies or VLC settings then with mceRemote2VLC.

  103. Ralf says:

    Sorry, this blog/website may not post xml command.

    MyMovies ExternalPlayers.xml for VLC can see here:

  104. David says:

    Hey Arend,
    tested the new version and it seems to work very well. No more conflicts with MCE and also minimizing itself automatically after starting.

    Very well done and big thanks from Germany!

  105. Marcus says:

    Hi Arend,
    tried your tool and stuck with some strange behavior. When vlc plays in fullscreen and I put just a single click on the fullscreen with the mouse… NO commands seem to get through! As soon as I take the focus from the fullscreen away (I have 2 monitors) by clicking on and activating a window on the second screen… vlc receives all commands.
    Ain’t that weird since the commands come over TCP and shouldn’t be bothered by focus or nonfocus of a window??
    my config:
    win7, hauppauge MCE remote, vlc 1.1.4
    THX for a quick response!

    • Arend says:

      I can confirm this behavior. Strange indeed! I will look into it

    • Arend says:

      It might not be that strange after all. When you don’t use mceRemote2vlc the play and pause button still work, the remote works as a regular keyboard press. So when vlc has focus and we press for example the Play button, vlc will receive the play instruction over it’s rc interface and by keyboard. The only option would be to detect weather vlc has (keyboard) focus or not, then decide what to do. For play and pause we should probably not send the commands. For now pressing the pause button twice (rapidly) pauses VLC when it has focus. I will think about this a bit more.

      • Marcus says:

        So you do think that these two mentioned input methods interfere with each other?
        I’m not so into coding/programming, but no matter what commands come to the vlc task, it should be able to handle it, ‘cause in case there are two commands within a defined range of milliseconds, it still should decide to handle only one, but as we have learned …probably not.

        Within autohotkey scripts it’s quite easy and works no matter of focus when you use e.g. the command “ControlSend”. Which means, that if you want vlc to pause whether it’s running in foreground or background, focus or nonfocus you could use it like: ControlSend, , {Space}, VLC Media Player
        It should be close to Visual Basic, because ControlSend sends a “space”-keypress (which equals pause/play) to a window called VLC…
        I don’t know how you did your program, but to give it a little workaround, wouldn’t it be the easiest way to kind of merge the two commands/buttons (Play/Pause) and instead set both equal to a “space-keypress” command, if possible? It would then toggle anyway between these options…

        Thanks a lot for your effort in general !!!-)

        • Marcus says:

          btw.: even if vlc is out of focus, so where only mceRemote2vlc should be working, I realize that pressing play ain’t the opposite of pressing pause. Which means that if I pressed “pause” while watching a video, I could only continue watching by pressing “pause” again and not play!!

          When the windows built in function is working it is vice-versa. Play only makes it play and Pause only pauses. This imho sucks too, a toggle pause/play would be ideal 😉

          • Arend says:

            I know. for this to work i would have to query vlc’s current state in order to decide whether to send play or pause command. maybe when i rewrite the part for the now deprecated rc-interface.

  106. Marcus says:

    sorry for writing again, cause I think that this is probably the right thought to start from, what I wrote in my second comment. THAT:
    your “play” is NOT the “play” it gets native from windows. It’s probably also not a space-keypress command, because that does alternate between play and pause. mmmmmhh…

  107. Robert says:

    With either an older CyberLink remote or a new VRC-1100 MCE Remote I get “Device Status: Remote not found” I’m running Win7 64 bit and have made sure NetFramework 3.5 is fully enabled. Both remotes work with Windows Media Center.

  108. Mathew says:

    I installed MCERemote2VLC, I tested it and it worked great. However, the next day when I tried it, it no longer worked. So I uninstalled it entirely. But now my remote control doesn’t work in Windows Media Center anymore.

    Any ideas what may have happened?

    • Arend says:

      Hello Mathew,

      Sorry to about your trouble. I however cannot relate your issues to something mceRemote2VLC might cause. It doesn’t change any settings on the host. No registry settings, no files are deleted etc. So are you absolutely sure you haven’t done anything else that might have caused it ?

      • Mathew says:

        I’m not absolutely sure of what I’ve done (I’m sure there was something I did unrelated to your app. and just didn’t realize it.)

        I did get it fixed, though, by going to the device manager and uninstalling and reinstalling the IR transceiver (don’t know why I didn’t think of it sooner.) 🙂

  109. Scott says:

    Love this program. Question: When I first installed it, I was using the default vlc skin and everything worked great. When I switched to another skin, the remote stopped working with vlc (still works with MCE). Any ideas?

    • Arend says:

      Hi Scott, I just tried a different skin then reverted back to the base skin. I couldn’t detect any problem with mceRemote2VLC. Maybe this is not related to the skin switching ? Did you try to reinstall ? If you want to try with a clean slate, you will have to manually remove the db file or better the entire directory: C:\Users\YOUR_USERNAME\AppData\Roaming\mceRemote2VLC

  110. Scott says:

    I’ll try that and get back to you. Thanks!

    • Scott says:

      OK. This is interesting. First, I uninstalled the app. When I went to the directory you mentioned, it wasn’t there. No biggie. I reinstalled, then tested with the same skin and the remote did not work. However, just messing around, under Preferences-Interface, I selected ‘Use Native Style’, then everything worked. I went back to my skin, which deselects ‘Use Native Style’, and the remote stopped working. Well, as long as it works. If you have any insight as to what’s going on, I’d be curious. Again, thanks for the help and a cool little utility.

  111. arenddeboer says:

    I can’t reproduce this, not even with the redcoast skin…

  112. Darren says:

    Hi, trying to use this for the first time. I have setup vlc as per the screen shots above.

    I get a Device Status of ‘connected’. However, the VLC Connection Status is ‘Unable to connect’.

    I have VLC running.

    Any thoughts on what else I might need to configure?


    • Arend says:

      Well it should be able to connect if setup according to the screen shot. The only option left is to check VLC really is listening on port 8765. You can do this with a program like Putty. With PuTTy select connection type telnet or raw and type “play” while having a song on pause in VLC. It should start playing. There are more details about connecting with putty in the comments.

      • David says:

        I realize this is an old post, but I had the same problem. The solution is to go to Tools > Preferences > Choose “All” > Interface > click on Main interfaces.
        Make sure you have “Remote control interface” checked. Restart VLC and mceRemote2vlc.

        (Windows 7 64-bit, VLC 2.0.3, HP remote)

  113. Inter111 says:

    Is there a way to use another button to skip more than 10 seconds? eg. 30 seconds, 1 minute, 5 minutes, 1 hour
    Is it possible for a button to fast forward until the play button is pressed?
    I’d also like the same functions for rewind.
    My files do not contain chapters.

    • Arend says:

      1) If you look at the command which is sent when you press Forward you will see: “key-jump+short”
      You could change this (or map a new key) to “key-jump+medium”, or “key-jump+long” medium stands for 1 minute and I haven’t tried long.

      2) try the “fastfoward” command, or “faster” command. “fastforward” forwards as fast as possible. “faster” increases the playing speed each time you send this command. The drawback with these commands is that the play button/command does not reset vlc to normal playing speed. You will have to map an additional button to “normal” in order to play at regular speed again.
      Check out these pages for more command options:

      • Inter111 says:

        1) I would like to map a new key to “key-jump+medium”. How do I do this? I need basic instructions please.

        Why does the forward (skip 10 seconds) button and back button not work correctly for .tp files?

  114. Inter111 says:

    I worked out how to map a new key.

    Using the forward and back (skip) buttons do not work properly with .tp files. They skip any random length or do not work at all. This is still the case if I change the file extension to .mpg.

    I watch a lot of .tp files. Is there a fix for this?


    • Arend says:

      I am afraid you have to ask that question in the vlc forums. mceRemote2Vlc justs sends the command and then hopes for the best. It does not implement the forwarding/skipping itself.

  115. WayneG says:

    Hi Arend: I’m using a generic WMC remote which is USB PnP, no drivers to install, on Win7 64. I have installed mceRemote2vlc and followed your instructions, but I’m only getting responses from Stop, Play, Pause, and Rew, just as I was before installing. When I run mceRemote2vlc from the start menu, the window says: “Device Status: Remote not found” Do I take that to mean I’ve done something wrong or that this is just one of those remotes that isn’t supported? Thanks.

  116. WayneG says:

    No, it is just called “Computer Remote Control” on the package, no other ID either on the remote or the manual. It is this one:

    Interestingly, it also controlled MediaMonkey right out of the package, but VLC is my preferred player. Thanks.

    • Arend says:

      Wayne, the only thing we can try is adding your device Product + Vendor ID to the list of supported devices. Since it claims compatibility it might just work. You can find the ID’s using this tool:
      This tool will list the required ID’s. Look for VendorID end ProductID column. Add them to this file: C:\Program Files (x86)\mceRemote2vlc\eHome Infrared Transceiver List XP.xml

  117. WayneG says:

    Thanks for the suggestion Arend, but still no luck. The ID tool showed it as being from Aureal Semiconductor, and I added it to the list as

    following the formatting from the other lines, but it was still not found after rebooting. I also tried Media Player Classic, but it behaves very strangely. With an MKV video, the FF and REW don’t work, but the skip ahead/back buttons result in about a 30s skip, but with an AVI video, the skip ahead/back buttons both re-start play at the beginning, just as they do with VLC. Hmmmm…

  118. WayneG says:

    Don’t know why this didn’t show in original post, added as:

    • Arend says:

      This blog has issues with xml/html-like data in comments. I tried to show you some parts of the ehome.xml file but that didn’t work.
      Anyway, it was worth a shot. I ordered the exact same remote because it is dirt cheap and my current one broke yesterday. I will let you know how that works out.

  119. WayneG says:

    Please let me know if it works for you. I’m sure you’ll like the remote–it even has a mode to let you move the mouse cursor and use right and left clicks. In the meantime I’ve installed XBMC and the remote controls it perfectly. I’ve been using XBMC on an original XBox for about a year, not sure why I didn’t think to try it on a PC.

    • Arend says:

      Ok, the remote arrived a week or so ago. But I got my old (original Microsoft remote) back to live and gave the new one away. I haven’t even tried it out. Sorry!

  120. wazer says:

    Hello i just bought a Vista remote control <- yes the name of it…. I have no problem using it in media portal or MCE on windows 7. However i cannot get it to work in your little nifty nice tool :).

    I have added these vendor id because i was not sure wich one it 100% was.

    On the manual it says:

    Version 1.0 2007/03

    ID NO: PAKL-F31VR901-00

    Theres no driver required for it to work. it just uses the built in one in microsoft and then its working. Just out of the box. I manage to get VLC connected to your tool but thats it. Not the remote. Happy New Year.

    • Arend says:

      This tool uses Media Portal as it’s base for detecting and communicating with the remote. But i did “hack away” at the source and removed everything but the MCE remote support. Maybe your remote is supported using one of the other “drivers” in MP. Did you buy it in a webshop? Do you have a link to this remote ?

  121. Mathew says:

    Previous poster to this thread, here …

    Anyway, since my last post, I’ve installed a new OS (Windows 7.) So I thought I’d try this again. It works in VLC, but in a very limited way. That is, the “Play” “Pause” and “Stop” buttons work as they’re supposed to, but no other buttons do what they’re supposed to.

    Incidentally, this is how it was when I tried it last when I reported my previous [unrelated] problem [just search my name if you need a refresher.]

    So obviously, I’m assuming that there’s something that I have overlooked (both this time and last time) since the functionality for both times are identical.

    Also [and unrelated] I can’t get my own mappings to register. That is, in the “Create mapping” box, I press a button on the remote control; it shows that I pressed it. But when I attempt to map the VLC command from the pull-down, the “Button Pressed:” pull-down forces itself to the default, ultimately not allowing custom remappings (I hope that makes sense.) Maybe there’s something I’m misunderstanding.

    • Arend says:

      Hi Mathew,

      If only the “Play” “Pause” and “Stop” buttons work then it doesn’t work at all. These buttons will work regardless of mceremote2vlc. What is the connection state, does it detect the device ? Does it connect to VLC? It looks like a connection problem. Did you verify VLC is listening on the correct port with PuTTY ?

      The mapping UI is flawed I agree. You best select or press the appropriate button, then check in the drop down box for the command you would like it to be mapped to. Then don’t select that command but write it in the drop down box. :-S. It shouldn’t update both ways but only select the current command based on the button pressed or selected.

      I will fix this in the next release.

  122. Mathew says:

    I have no idea what I did differently, but now it works.

    But entirely for your information (for whatever it may be worth to you) back when the “Play” “Pause” and “Stop” buttons were the only working buttons, “Device status” was “Connected” and “VLC connection status” was “Connected” as well. And the “Button pressed” field correctly showed any buttons that I pressed. However, the “Commands to VLC” field remained blank. ?????

    Thanks, though, for your quick reply. 🙂

  123. Stefan says:

    I just tried to get the tool working with VLC and got a little frustrated.
    It’s accepting the keys pressed on my remote control, it’s connected with VLC and it sends it’s commands to VLC. So what’s the problem for me? When mceRemote2VLC has got the focus, it’s working well. But if VLC has got the focus, VLC acts like if mceRemote2VLC is not installed at all. VLC is simply responding with it’s default actions when I press remote control buttons. I don’t have a clue where they are configured within VLC or how to avoid it. BTW, in these situations also mceRemote2VLC indicates that it sends the proper commands to VLC. Simply VLC is doing it’s own stuff.

    I would appreciate any help or comments.


    p.s. I also realized that the mapping dialog has some flaws. But the workaround described above is helping.

  124. Stefan says:

    Arend, it’s a Windows 7 x86. VLC is version 1.1.5. Probably I’ll try 1.1.7 later.

    Are there any logs which might be helpful?

    As I said, everything is ok when mce2RemoteVLC has got the focus. But that’s rarely the case, especially when running VLC in fullscreen mode.

  125. Arend says:

    Try 1.1.7 even though I don’t think it will make a difference. Do you have a “genuine” Microsoft remote ?
    There are no logging options. The only think to find out whether this is VLC or mceRemote2VLC fault is probably by using PuTTY from a remote machine and see if VLC responds to commands when in focus.

  126. Alex Hamby says:

    I’ve Just tried to install this software and cannot get it to work, Both devices are listed asd connected, but it has no effect on VLC. Am i doing soimething wrong?

    • Arend says:

      Do you see the commands appear in the box “Commands to VLC:” ?
      Windows 7 ? (x86/x64), which version of VLC? Do you have a playlist ?

  127. Alex Hamby says:

    The Commands appear in the DOS box, I’m running 32bit XP and i don’t have a playlist, i’m watching films

    • Arend says:

      That’s strange. To me this looks like VLC is not responding properly. You can test if this is the case with PuTTY and connect to VLC directly using the RAW option. Make sure mceRemote2VLC is not running. If this doesn’t work then it must be a VLC problem.
      (just an executable, no installation required)
      hostname: localhost
      connection type:raw
      Press connect and enter pause at the prompt (while having an item playing in VLC)

  128. Stefan says:

    Hello Arend, I’m using a Logitech Harmony One acting as a Microsoft remote in this situation.

    Don’t worry too much about this. I tried this in the context with Windows Media Center 7+Media Browser and VLC as external player. I did use MPC-HC first without remote control problems. But this brought up other issues.
    Since a few days I’m testing Mediaportal. Remote control is no issue there and the internal player does not need to be exchanged as far as I can tell at the moment.

    So, I won’t pursue the VLC problem at the moment.

    Thank you for your support anyway!

  129. Marv says:

    Hi Arend

    Exactly what i’ve been searching for!

    But one problem left:
    I installed .NET Framework 3.5 and also mceRemote.
    Then i wanted to test it…. but the mceRemote isn’t able to find my RC! (on vista home premium)
    Do you know a solution for it?


  130. WMV Video Pipeline says:

    At first I wanted to use VLC (if I could get the remote to work) instead of WMC because I had so many problems with codecs (mostly solved in the meantime with a lot of trial & error with the Shark007 codecs).

    But I prefer WMC due to the excellent 10-ft. interface that the Media Browser plug-in provides.

    I later realized that Media Browser could be used to activate an external player like VLC, and in addition to having no codec problems, the playback quality is better and sharper in VLC (due to the range of color adjustments and especially due to the sharpening filter).

    About a month ago, I installed the mceRemote2VLC software and configured it as best I could per your instructions.

    But the only remote functions that worked with VLC were play and pause.

    Now I see from a post on Jan. 26 that “If only the “Play” “Pause” and “Stop” buttons work then it doesn’t work at all. These buttons will work regardless of mceremote2vlc.”

    The remote I am using is this one:

    This remote installed without any drivers and works fine to control WMC. Do you think this remote incompatible with mceRemote2VLC ?

    It is my understanding that this remote (like most others) is basically a wireless keyboard with only some of the keys. What I don’t understand why the skip or fast forward/reverse commands which work fine for WMC would be different for VLC, since those functions work if using an actual keyboard.

    In your Ja. 26th post, you mention a new release. Has anything new been released in the last month?

    Thanks for your help.

    • Arend says:

      Hi, nothing new has been released. Does mceRemote2Vlc detect your remote as seen by “Device status:” ?
      What happens if you press the remote buttons in the “create mapping” configuration page ? If it does not detect the remote then I can’t do much about it. Maybe later when I have a bit more time at my hands I can look into supporting plain keyboards.

  131. Dan says:

    Hi! May I say – awesome utility! Many thanks.
    I’ve been playing around with mappings, and everything seems to be fine. Except I’m struggling with chapter points in mkv files. I’ve tried chapter_n, key-chapter-next and key-next. All seem to have the same effect – they just restart playing the file from the beginning (there’s only one file in the playlist!). Is there a code I can use to select chapter points in this sort of file?

    • Arend says:

      Hi Dan, Did you use “key key-chapter-next” ? The extra “key” is required. I just tested this with a matroska file with chapters and it worked fine.

  132. Dan says:

    Thanks for your quick reply. Yes I did use “key key-chapter-next”. I’ve tried this on several machines with the same result, but I guess out of laziness I’ve been using the same .mkv file. I’m pretty sure there’s nothing funny about the file; an mkv file with H264 video and AC3 audio. Two audio streams, subtitles and chapters, all compiled into the mkv file using mkvtoolnix. It sounds like this may be a matter of differences between mkv files, so I’ll try a range of other ones and see if I can spot a pattern. Dan

  133. Arend says:

    I tried it with the test file listed here:
    Before that I added chapters using mkvtoolnix, but that file behaved like you described. I thought I might have done something wrong, but maybe VLC does not support this type of chapters.
    Try going to the next chapter using VLC’s menu Playback->Chapter->chapter-x
    If that doesn’t work it must be VLC/the file.

  134. Dan says:

    VLC does support these chapters. They work fine using the buttons and using the menus. But it must be some difference in the way chapter points are created in the test file and in mkvtoolnix. A missing setting perhaps. Thanks for your help. I’ll investigate further. Dan

  135. Arend says:

    You’re welcome

  136. Gerrit says:

    I’ve problems with next chapter and previous chapter commands (chapter_n, chapter_p, key key-chapter-next and key key-chapter-prev).
    I use Windows7-x64 NL, VLC 1.1.10, Hauppauge MCE remote. I tried next chapter on several DVD rips. VLC shortcut keys shift-n and shift-p work normally on this DVD-rips, but passing chapter_n via mceRemote2vlc won’t work. As far as I can see, other VLC commands, par example: chapter 1, chapter 2 etc, all work fine.

    Do you have any clue what causes this flaw?
    Can you reproduce this problem?

    What I noticed is, that as soon as I check “Remote control interface” in VLC’s Main Interfaces, “oldrc” comes up, in stead of “rc”.

  137. Gerrit says:

    New information: This problem is not related to certain vlc commands like chapter_n, but is related to some mce remote buttons which, even though they are mapped by mceRemote2vlc, they are intercepted or interfered by mce.
    I don´t want to uninstall mce, because I use mce for playing photo´s.
    When I map chapter_n under Numpad1 or Clear, it works correct. When I map chapter_n under ChannelUp or Skip, it won’t work.
    If I avoid using these remote buttons, (aparently they interfere with mce, even though mce is not started):
    ChannelUp, ChannelDown
    Skip, Replay
    RecordedTV, Guide, LiveTV, DVDmenu

    Next question, how do I temporary switch off the interference with mce? Than I can use all mce remote buttons for VLC.

    • Arend says:

      Hi Gerrit, this might help:

      “try this

      turn off Media Center from reacting to a MSC keyboard or IR remote

      click Start | Control Panel | Default Programs | Set Program access and computer defaults

      then select the option for Custom
      expand chevron at right side of screen
      then scroll down for category: Choose a default media player
      find: Windows Media Center
      then uncheck option: Enable access to this program
      beside: Windows Media Center


  138. Billkwando says:

    Hey!!! 🙂

    I’m having a problem too. I’m fiiiinally upgrading to the newest version (wanna try to put it in my startup since it auto-minimizes now), and it stopped working. It acknowledges the first button I press and then stops, and not even that first button press is acknowledged by VLC.

    It says this in the lower box:
    Unable to open db
    SQLite error
    no such table: settings
    Value cannot be null.
    Parameter name: ipString

    I did copy my old mapping file over, in case that helps.

  139. Billkwando says:

    Also, even when I copy the IP/Port from VLC to Settings, if I close your app and reopen, it’s no longer there.

    • Arend says:

      Hi Billkwando,

      The db of earlier versions may not be compatible with the current one. I believe only the previous version allows you to copy the old database. A clean install maybe the only way forward.

      • Billkwando says:

        Yep! Reinstalling did the trick. 🙂

        If you decide to make a new version, you should add the ability to start up w/ windows. 😉

  140. Billkwando says:

    For folks who want to add it to startup manually, here’s the steps:

  141. Mathew says:

    Hi Arend,

    Previous poster to this thread; I use mceRemote2vlc all the time now. It’s perfect (just one minor hiccup for me.)

    To preface, you’ve implemented “cycle through audio tracks” in the key mappings. But I don’t see a key mapping for “cycle through audio devices.”

    You see, if I’m playing a video that has a 5.1 AC3 track, I must select “A/52 over S/PDIF” to get the sound to play over my 5.1 sound receiver. The annoyance come in when I’m watching a succession of videos that require “A/52 over S/PDIF.” Anytime one video finishes and the next one starts, it reverts the audio device to “Stereo” and I have to manually change it to “A/52 over S/PDIF” again; i.e., I have to get off the couch, walk over to my computer and select “A/52 over S/PDIF;” each and every time. Yeah, I know, life is so hard for me. 😉

    Is there any way around this using mceRemote2vlc?

  142. Mathew says:

    Nevermind, I discovered how to make VLC default to “A/52 over S/PDIF” I should have looked more into the settings before posting. 🙂

  143. Martin says:

    I also have a small problem.
    I set up everything just how you’ve explained it, then I open VLC and mceremote2vlc.
    The device and VLC connection are both connected but the Programm is not responding to my remote control … when I want to do the mappings nothing happens :(((.
    I’m using win7 and the hauppauge MCE remote.
    pls help 🙂

  144. Eric says:

    I have the same problem as Gerrit who posted on 7/14/2011. I use your excellent program coupled with the MediaBrowser plugin for WMC. I m unable to map the chapter_p and chapter_n commands to the previous and skip buttons. Like Gerrit, I am unable to use the buttons he mentions because somehow the commands get intercepted by WMC before they reach your program.

    No worries though. I set skip and previous to None and mapped chapter_p and chapter_n to the 1 and 3 button. All works well.

  145. Kangoo says:

    Hallo! Versteht hier wer auch deutsch?
    Hab ein Problem: Bei mir tut sich rein garnichts wenn ich ne Taste auf der FB drücke. Hab das auch schon in Eventghost getestet… da müsste ja normalerweise links in der Spalte angezeigt werden, dass ich was drücke (mal von ner richtigen Reaktion (Pause-> Pause) abgesehen. Mein IR Empfägner leuchtet rot, wenn ich was an der FB drück, aber das wars dann leider auch schon. Was mach ich falsch?

  146. Kangoo says:

    How can I teach the commands from vlc to the remote?

    • Arend says:

      What kind of remote do you have (brand/model) ? Does my app recognize your remote ? Does it register the button presses ?

  147. Kangoo says:

    The ir looks like this:
    and the remote looks like this:

    Model: OVU400102/71
    HP Media Center

  148. Kangoo says:

    No, it doesn’t. But I can see the tasks in eventghost and the ir light glows.

  149. Arend says:

    Not sure what could be the problem, Maybe Eventghost hides the button presses for the rest of the system ? I know it has an option for that, but it’s not enabled by default.

  150. Paul says:

    Is there a way to edit default mappings I want to be able to turn subtitles on or off with one button pres

  151. Paul says:

    thanks for the reply, i’ll give it a go.

  152. klobster says:

    Is there a way to enable short and long skips at the same time (on different buttons, of course)?

  153. Arend says:

    Sure, you could try playing with the seek command, every button can be programmed.

    | seek X . . . seek in seconds, for instance `seek 12′
    | pause . . . . . . . . . . . . . . . . toggle pause
    | fastforward . . . . . . . . . set to maximum rate
    | rewind . . . . . . . . . . . . set to minimum rate
    | faster . . . . . . . . . . faster playing of stream
    | slower . . . . . . . . . . slower playing of stream
    | normal . . . . . . . . . . normal playing of stream

    • klobster says:

      The seek does not seem to work as you say. I was hoping to use skip as key key-jump+long, but it doesn’t seem to work?

  154. Arend says:

    Indeed, the seek just jumps to the time specified. My bad. I also tried out the medium and long jumps, but they do not seem to work consistently, is that your problem too ? I tried it directly in telnet, so this must be something in VLC rather than the remote app I wrote.

  155. Neil Hunt says:

    Is there a way to launch vlc from a remote command?

  156. Works perfectly, thankyou! To those wanting to use their remote to start VLC, you could try one of those apps which allow you to program a button/key-press to a function key which would open an app, similar to the way you can program a HID controller to press a certain key, when another button is pressed. Something like HIP may work. 🙂

  157. Chance says:

    I’m having a strange issue. The program is installed correctly and recognizes the remote and, as far as I can tell, sends the commands as it should. However, specifically pressing pause, while pausing like it should, prompts the Preferences window to pop up every time. Is there a simple solution for this?

  158. DanOnline says:

    What a fantastic tool! VLC is a welcome relief to what seemed like endless experimentation with codecs for my media center.

    As an added bonus, I programmed the following two remote mappings…

    NumPad1 -> key key-audiodelay-down
    NumPad2 -> key key-audiodelay-up

    which allows me to pull an even slightly out-of-sync video into sync in real time.

    Thanks so much for sharing this valuable tool with us.

  159. DanOnline says:

    I too have run into the problem described by Gerrit above, but as I’m running VLC as an alternate player from within Windows Media Center 7 I cannot disable it as you suggest.

    My main problem is with the Replay and Skip buttons which cannot be mapped and, unfortunately, default to “previous” and “next”. This might not be so much of a problem except that these buttons are used in Media Center and it’s almost impossible to break the habit of using them when in VLC.

    Since pressing either of these buttons ends the current playback it’s a big problem in a WMC setting.


    • Arend says:

      That’s going to be a tough nut to crack. It must be somehow possible, but it might have to be done at the driver level. Which is not my area of expertise. Another problem is that I currently use a different remote which does not work with this tool..

  160. DanOnline says:

    Arend: Thanks. I posted a query on the Next/Previous problem to the VLC community forum. A VLC developer told me that you cannot suppress the interpretation of these keys in VLC. I suppose a VLC plug-in could be developed to do this, but that’s beyond the scope of my project.

    I also tried EventGhost, but a bug in the remote control plug-in caused events from the remote to be lost under certain conditions. Yours is still the best solution to this problem. Thanks again.

  161. DanOnline says:

    Sorry for asking this here, but couldn’t find a better place on your blog to ask a general question.

    I really like your math-based spam blocker. Is it a WordPress add-on? Which one?


  162. rickou says:


    i have found your soft, but my receiver is not working on it..
    you have a near VID/PID device but not mine…
    i’m using an old “ABIT Media XP bay” with IR remote receiver..
    VID_04B4 PID_0101
    it is detected as an USB KEYBOARD PIH

    do you think it is possible to make it work with your software ?? (i already tryed to add it in receiver list without success…)

    thank a lot !

  163. Jim says:

    MCE Remote VLAN app works GREAT. Saved me ten bucks upgrade fee 8.1
    Thank You, Jim w6cwm

  164. Mathew says:

    Just FYI for you to do with as you please:
    After upgrading to Windows 10, my remote control did not work with mceremote2vlc. Although the VLC connection status showed “connected”, no button presses were showing up in the “Button pressed” window. Needless to say, I reverted back to Windows 7 (and all works just fine.)

  165. magic says:

    The link for the setup file doesn’t work. Is it still possible to download your program?

    • Arend says:

      You are correct, it looks like I inadvertently deleted this file. I did a quick search and could not find it elsewhere. I guess I better take this post down.

Leave a Reply to TAG